Service hotline400-8300-187中文English

Contact us
Add:Block K,Xinzhuang lndustrial Park,No.84 Tianyuan Road,Yonghe Street,Luogang District,Guangzhou,PRC
T e l: 0763-6830999
Phone: 13927667770
Website: www.gzoyrr.com
E-mail: ouya82441225@163.com

Are you here:Home --> Product --> Low temperature chiller

Low temperature chiller

Flooded type water-cooled chiller with heat recovery

【Description】

Flooded type water-cooled screw chiller is an energy-saving central air conditioning system with high energy efficiency ratio, it’s developed ,designed and manufactured by Eurasian freezing equipment Co., ltd.. The unit’s energy efficiency up to 5.2.Power consumption decreased 15%-25% than normal dry type products..The unit is equipped with the collision, interception points oil technology efficient oil separator.The units have 16 specifications, cooling capacity ranged from 356800kcal/h to 1960400kcal/h, chilled water temperature be changed from 5 to 15 degrees. In addition to the standard specification, various of non-standard units other power system products can be customized to meet different requirements.Single chip microcomputer control and PLC control can be chose to extend network function, can provide remote monitoring.The units can be equipped with heat recovery tubes, in the low temperature mode, the recyclable heat account for 30% of total refrigeration capacity and provide free living hot water.
Product details

Key features:

1.High Efficient

Power consumption decreased 15%-25% than normal dry type products. Installed with double screw 

compressors, high efficient heat exchanger, and electronic expansion valve, the above components will 

work together and at high efficient as 3~1 level.

The units can be equipped with heat recovery tubes, in the low temperature mode, the recyclable heat

 account for 30% of total refrigeration capacity.

The whole unit efficiency can be increased 5% when heat recycling

2.Running stable

The units has 8 kinds of safety protection measures to ensure the normal operation of the units.

Unit is parallel type design, and equipped with combined throttling device 

To ensure the machine performance in line with national standards, all units passed the test of national

 security detection system before delivery the products.

3.Intelligent management

The unit can be controlled by single chip microcomputer or PLC control, to meet the different requirements 

of customers

The unit adopts microcomputer touch control system, can provide the simplest and most considerate 

operation interface, timely feedback for various repair information.

The control system can be connected with the users’ central control system, customers can monitor of the

 unit operation status at any time.

4. Easy installation and maintenance

The units are filled with refrigerant and lubricant before delivery, customers only need to connect the inlet 

pipe, outlet pipe and power to run.

The control interface directly display the fault contents, it’s much easier for customers to understand and sort

 out faults.

5. Various of refrigerant to meet customers’ specific requirements. 

According to customersrequests, various of refrigerant, like R22.R407CR134a will be available for 

customer’s option.